Let the Transformation Begin with Stella Recycling Paints!
- Ramazan Buğdaycı
- Mar 13
- 3 min read
How Should I Paint Each Surface?
How to Paint a Kitchen Countertop with Bianca Stella?
Thanks to Bianca Stella's superior and unique pure acrylic paint formula, you can easily renovate your worn-out or color-changing granite, tile, marble, quartz (Çimstone), acrylic (Corian), laminate, solid wood, stainless steel, or brass kitchen countertops without breaking or damaging them.
Materials Needed for Application
Moher roller or velvet varnish roller (depending on the surface)
Silk brush for narrow and protruding areas
Preparation Before Applying Bianca Stella Paint
The surface to be painted must be free from dust, dirt, and grease. If necessary, sanding should be done.
Paint cannot adhere to oily, silicone-coated, or residue-covered areas, so these surfaces must be cleaned with chemical cleaners. If required, a degreaser should be used.
If the surface is not properly cleaned, the paint will not adhere, so after cleaning and drying the problematic areas, the application should be repeated.
The most crucial step before painting is cleaning. This step can also be completed using vinegar.
If there are any loose, lifting, or swollen parts on the surface, they should be repaired before painting.
After cleaning, ensure that the surface is completely dry. If necessary, use a dryer to remove moisture.
Application of Bianca Stella Paint
With 1 liter of Bianca Stella, you can paint 10-12 m² with two coats.
Bianca Stella is ready to use. Stir thoroughly until it becomes homogeneous without dilution. Pour a sufficient amount into a suitable tray.
Use a moher roller or velvet varnish roller for the best results and a silk brush for narrow or protruding areas.
Properly distribute the paint on the surface, and avoid reapplying brush or roller strokes on drying areas.
Under suitable weather conditions, the second coat can be applied after 2-3 hours.
If a wood grain effect is desired, commonly preferred base colors include tones like kraft paper and light beige.
Creating a Wood Grain Effect with Bianca Stella Wood Colors
After 3 hours, once the base coat is complete, a wood-like effect can be applied to the countertop using Bianca Stella Wood Colors (optional).
Pour the required amount of Bianca Stella Wood Color into an empty container and mix with an equal amount of water until homogeneous.
Apply in a single direction and single coat using a trimming brush or sponge, ensuring uniform strokes.
Maximo Protective Liquid Glass Application
To increase durability, apply Maximo Liquid Glass, our transparent protective product, over Bianca Stella paint.
Bianca Maximo Solvent-Based Liquid Glass is a two-component product.
Mix Component A (large container) with Component B (small container) and apply within 30-40 minutes using a velvet varnish roller.
Avoid reapplying brush or roller strokes on drying areas.
Maximo's high performance allows for a single-coat application.
If a second coat is preferred and there is enough product available:
Mix half of Component A with half of Component B for the first coat.
After 2-4 hours, mix the remaining portions and apply the second coat.
(Maximo covers 4-6 m² per coat).
Post-Application Care Instructions
First 2 Days
Do not use the treated surface for 1 day.
Surfaces exposed to water should not be used for 2 days.
First 7 Days
Do not allow water accumulation on the surface.
Wipe wet areas with a dry cloth or paper towel.
Avoid impacts, placing heavy objects, and pushing or dragging items on the surface.
After 7 Days
Do not use bleach directly. If necessary, dilute it with water before use.
Safe cleaning products include:
Detergent, degreaser, stain remover, dish soap, and vinegar water.
Cleaning tools that can be used:
Dish sponge (no scrubbing with abrasive pads).
Avoid:
Lime removers, hydrochloric acid, drain cleaners, high-alcohol substances, thinner, and disinfectants.
4o
Comments